Archtop Neck Blank Model 47m laminated/17 degree headstock Call Your Own

Archtop Neck Blank Model 47m laminated/17 degree headstock Call Your Own
Archtop Neck Blank Model 47m laminated/17 degree headstock Call Your Own
Archtop Neck Blank Model 47m laminated/17 degree headstock Call Your Own
Archtop Neck Blank Model 47m laminated/17 degree headstock Call Your Own

Archtop Neck Blank Model 47m laminated/17 degree headstock Call Your Own

Model 47 Archtop Neck Blank. Medium Flamed Maple/ Walnut Stripes. This model will come with wings glued on each side of the headstock.

The pictures are for representation only, the amount of flame may vary. If you have done the math like I have, I know with 28 years.

Of experience, that it takes 2 1/2 to 3 hours to get a neck this far along. I have developed a system to produce and sell these blanks. You get a 3.5 degree neck joint cut in, but some final fitting and shaving. Also, we have left the tenon on so you. Will be free to mount this however you wish via dovetail or tenon. We provide a rounded shank, a volute behind the nut. A 17 degree pitched headstock (this model only). A truss rod slot with the pocket hole, ready for the nut. These blanks are made in Barberton, OH, USA. The best part is that they are only.

Rough sanded leaving the final tweaking for you to do. So you can call it your own. Other models and species of wood will be available.

Are within 1/32 of an inch. For 25 to 25.4 scale. 1 3/4" at the nut and 2 5/16" at the other end.

NOTE: Heels are glued up. The item "Archtop Neck Blank Model 47m laminated/17 degree headstock Call Your Own" is in sale since Wednesday, August 14, 2013. This item is in the category "Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Necks". The seller is "luthierman7" and is located in Barberton, Ohio.

This item can be shipped worldwide.


Archtop Neck Blank Model 47m laminated/17 degree headstock Call Your Own